Installation steps of prison fence

Prison fence can make criminals have a strong direct shock effect from the outside, and eliminate the idea of ​​escape psychologically. The bayonet net is designed with anti-shearing and anti-climbing functions, which can effectively prevent criminals from escaping.

1. Prison fence can make criminals have a strong direct shock effect from the appearance, and eliminate the idea of ​​escape from the psychology. The bayonet net is designed with anti-shearing and anti-climbing functions, which can effectively prevent criminals from escaping.
2. The diameter of the prison fence’s barbed wire is 2.5mm, and the thickness of the steel plate is 0.5mm.
3. The surface technology of prison fence: anti-corrosion treatment, aging resistance, acid and alkali resistance, no fading; the arrangement density of barbed wire mesh is not less than 10 revolutions/meter, and the distance between adjacent circles is not more than 100mm. The material of the prison isolation net is 304 stainless steel.
4. Prison fence installed a 4.0-meter corrugated fence and 2.5-meter corrugated fence at a height of five meters between the inner wall of the surveillance area and the concrete road.

• 1. Research: It is necessary to calculate the cost of the project and go to the on-site investigation.
• 2. Preparation before installation: Calculate the materials required for construction and the planned number of construction days, prepare the materials in advance, and find experienced personnel for construction.
• 3. Excavation of foundation pit: After reaching the size requirements, excavate the foundation pit, level and compact it.
• 4. Install the column: weld and fix the bottom of the column with the steel plate of the embedded part, while the sealant is waterproof and the cement is sealed.
• 5. Assemble the connection grid: the grid is vertically fixed by the connection card and the terminal.